bokman for iPhone 7 White Screen Replacement Parts Full Display Assembly
bokman for iPhone 7 White Screen Replacement Parts Full Display Assembly
Test before you install
1. Disassemble your iPhone
(1) Power off your iPhone and remove the two screws with 5-points star screwdriver
(2) Use the spudger to separate screen from rear case along four edges
(3) Open the screen from rear case carefully to avoid the damage on cables
NOTE:
1. Please make sure you have tested the product before installation, the tear off the film during installation.
2. Do not pull the flex cable. Be careful during the installation, otherwise it will damage the screen, blurred screen or other screen issues.
3. Do not bend the link between screen and flex cable.
4. The four corners of the LCD are fragile areas, please install carefully.
5. This part is very fragile. Please balance the power to place the screws in case it cracked when installing.
6. This is the fasten position, please incline the screen to 15° and then install.
7. Do not press or touch the liquid crystal glass as it is very fragile.
1 x Suction cup
1 x 5-point star screwdriver
1 x Type-Y screwdriver
1 x Crosshead screwdriver
1 x Screen protector film
1 x Clean cloth
1 x Installation instruction
2 x Plastic opening tool
2 x Plastic triangular pty-tool